|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
TruBolt wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete. For additional application versatility, TruBolt wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long-term integrity of connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
The Zamac Nailin? is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion-resistant Zamac alloy is used to form the anchor body with either a mushroom or flat head. The anchor can be used for light-duty, tamper-proof applications.
|
Code listed for cracked and uncracked concrete and masonry applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
|
Trubolt? Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193.
|
|
|
