|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Single flute trim bit allows for a faster feed rate. Solid carbide gives best rigidity and long life.
|
Self piloting feature eliminates the expense and upkeep of a ball bearing assembly. Cut all plastic laminates. Use on portable routers and laminate trimmers for trimming plastic laminate.
|
The 41 Series Bits provide a range of bevels from 8 to 45 deg and feature a ball bearing guide.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Dovetail bit is used to create strong, attractive joints for drawers and boxes. The fully hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Bits will work with many popular dovetailing jigs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers. 14 degree angle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully-hardened and tempered steel shank provides ultimate durability.
|
Bosch solid carbide router bits are designed for faster feed rates and chip removal, hard-to-route materials and superior bit life. They feature premium-quality micro grain carbide construction, engineered with a special heat treating process for an extra-fine finish. The bits provide maximum sharpness and edge retention, as well as best rigidity and long life. Bosch router bits retain painstaking accuracy across hundreds of profiles for mortising, edge forming, trimming, surface forming and cabinetry/joinery in wood, plastic and laminate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Up cut spiral is used for upward chip evacuation and the best finish on the bottom side of workpiece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produces many different styles of fluted millwork or use to cut decorative designs in cabinet door. Ideal bit for making signs. Cuts all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers. No 18-106, 3/16 in large radius. No 18-108, 1/4 in large radius.
|
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as handheld and table-mounted portable routers.
|
Cuts all composition materials, plywood, hardwood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
|
|
|
