Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > BRASS COMPRESSION FITTINGS
Choose a sub category:
BRASS COMPRESSION SLEEVES BRASS COMPRESSION UNIONS BRASS COMPRESSION INSERTS
BRASS COMPRESSION CAPS BRASS COMPRESSION NUTS BRASS COMPRESSION ADAPTERS
BRASS COMP MALE CONNECTORS BRASS COMP FEMALE CONNECTORS BRASS COMPRESSION TEES
BRASS COMPRESSION ELBOWS
Sort By:
1 2 3 4
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve
Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metal 730561-05 Brass Compression Fitting Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals PLF 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve
Anderson Metals Pipe Sleeve, Nominal Size: 1/4 in, Compression Connection, 300 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Pipe Sleeve, Nominal Size: 3/8 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals PLF 760 Compression Sleeve Anderson Metal 730561-10 Brass Compression Fitting Anderson Metal 730561-06 Brass Compression Adapter Insert
Anderson Metals Pipe Sleeve, Nominal Size: 3/16 in, Compression Connection, 400 psi, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.
Anderson Metals 50868-0402 Tube Adapter Anderson 750066-0302 3-Piece Reducing Tubing Coupling Anderson Metal 750068-0602 Brass Fitting
Anderson Metals Pipe Adapter, Nominal Size: 1/4 x 1/8 in, Compression x MPT Connection, Brass, Suitable for: Plastic Tubing Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged. Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.
Anderson Metals 730061-10 Compression Nut Anderson Metal 750097-0604 Brass Flare Adapter Anderson Metals P60P Tube Sleeve
Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines. Anderson Metals Tube Adapter, Nominal Size: 1/4 x 3/8 in, Compression Connection, 300 psi, Brass Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metal 750097-0806 Brass Adapter Anderson Metal 750068-0406 Brass Fittings Anderson 750066-0606 3-Piece Tubing Coupling
Anderson Metals Tube Adapter, Nominal Size: 1/2 x 3/8 in, Compression Connection, Thread Type: Straight, 200 psi, Brass Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Anderson Metals Pipe Connector, Nominal Size: 3/8 in, Compression x Female Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing
Anderson 50869-0402 Tube Elbow Anderson Metal 750065-05 Brass Compression Elbow Anderson Metal 750068-0408 Brass Fittings
Anderson Metals Tube Elbow, Nominal Size: 1/4 x 1/8 in, Angle: 90 deg, 400 psi, Brass Anderson Metals Tube Union Elbow, Nominal Size: 5/16 in, Angle: 90 deg, 300 psi, Operating Temperature: -65 to 250 deg F, Brass Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines.
Anderson 750066-0406 3-Piece Tubing Coupling Anderson Metals 60P Tube Sleeve Anderson Metals 60P Tube Sleeve
Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.
Anderson Metal 750068-0812 Brass Fittings Anderson Metal 750064-08 Brass Compression Tee Anderson Metals 60P Tube Sleeve
Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Anderson Metals Pipe Tee, Nominal Size: 1/2 in, Compression Connection, 200 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Plastic Tubing Anderson Metals Delrin Sleeve, Nominal Size: 3/8 in, Compression Connection, Temperature Rating: -65 to +250 deg F, Plastic, Suitable for: Copper, Brass, Aluminum or Plastic Tubing
   
 
1 2 3 4