|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
For home and auto applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.
|
This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable.
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.
|
Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
|
Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire.
|
This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends.
|
GB Plier, Cutting Capacity: 1-1/2 in, Jaw Type: Comfortable, High-Leverage, Curved Serrated, Jaw Material: Carbon Steel, Nose Type: Long, Tip Width: 1/4 in, Cushioned Handle, 3-1/2 in L Handle, Handle Color: Red, 6-3/4 in OAL, Cut Material: Aluminum, Brass, Copper, Includes: Cutter and Crimper
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The floodlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
|
|
