|
|
|
|
|
|
|
|
|
|
|
|
|
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers.
|
The ClosetMaid? traditional fixed-mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
Use to join two shelves together to create a continuous run of shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Shelving Support Bracket, 16 in L, 2 in W, 2 in H, Steel, Epoxy-Coated
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap-in place design. For corner installations. Measures 3/8 in H x 5 in W x 3/4 in D. Steel construction with epoxy-coated finish.
|
Use with SuperSlide? shelving to create uninterrupted sliding action even around corners for walk-in closets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
|
A key component of our fixed-mount system. Use a 12 in bracket for all 12 in deep shelving and all 16 in deep shelving when used for hanging clothing.
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776 for organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For Organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
|
The ClosetMaid? traditional fixed-mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed-mount system is the original, economical way to install ventilated wire shelving. Shelf clip attaches to the back of shelving to secure shelf to the wall. Shelf clip locks shelving into place attaching it at the top and bottom of shelf wire.
|
The ClosetMaid? traditional fixed-mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Metal construction.
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
Use in place of support brackets when stacking two or more shelves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A key component of our fixed-mount system. Use a 12 in bracket for all 12 in deep shelving and all 16 in deep shelving when used for hanging clothing. Use a 16 in bracket for all 16 in deep storage shelving.
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
|
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#103 is suitable for use with 10 in, 12 in and 16 in Shelf & Rod and 12 in Linen. #106 is suitable for linen shelves with 16 in depth. Bulk pack.
|
ClosetMaid End Bracket, Includes: Pins and Anchors
|
|
|
